Closest Equivalent Alloy | IS 4522 | Closest DIN 17445 | ASTM - A297 Gr | C % | Ni % | Cr % | Mo % | Si % | Mn% | others % | Applications |
---|---|---|---|---|---|---|---|---|---|---|---|
- | - | - | HA | 0.20 max | - | 8.00 - 10.00 |
0.90 - 1.20 |
1.0 max |
0.35 - 0.65 |
- | Good oxidation resistance upto 650oC. Used in oil refining industry. |
HRCS 28/4 |
- | - | HC | 0.50 | 4.0 max |
26.0 - 30.0 |
0.5 max |
2.0 max |
1.0 max |
- | Good sulphur and oxidation resistance upto 10950C. Minimal load bearing capacity. |
HRCS 5/28 |
Grade 4 | - | HD | 0.5 max |
4.0 - 7.0 |
26.0 - 30.0 |
0.5 max |
2.0 max |
1.5 max |
- | Can be used in high sulphur application (avoid at 700o-800oC) upto 1000oC. |
HRCS 9/29 |
Grade 6 | - | HE | 0.20 - 0.50 |
8.0 - 11.0 |
26.0 - 30.0 |
0.5 max |
2.0 max |
2.0 max |
- | More ductile and higher corrosion resistance (avoid at 815oC) upto 1050oC for high S atmosphere. |
HRCS 9/19 |
Grade 5 | 1.4825 | HF | 0.20 - 0.40 |
8.0 - 12.0 |
18.0 - 23.0 |
0.5 max |
2.0 max |
2.0 max |
- | Suitable for applications requiring high strength & corrosion resistance at 6500C to 8700C. |
HRCS 12/25 |
Grade 7 | 1.4837 | HH | 0.20 - 0.50 |
11.0 - 14.0 |
24.0 - 28.0 |
0.5 max |
2.0 max |
2.0 max |
- | Suitable for applications between 9270C and 10930C. Not to be used from 7500C to 8900C and for operations invloving thermal shock & carburizing conditions. |
HRCS 12/25 |
- | - | HH Type2 |
0.20 - 0.50 |
11.0 - 15.0 |
22.0 - 24.0 |
0.5 max |
1.75 max |
2.5 max |
- | Same as HH but with superior creep resistance and reduced ductility. Used from 650o C to 1000o C under constant temperature conditions. |
HRCS 15/28 |
- | - | HI | 0.20 - 0.50 |
14.0 - 18.0 |
26.0 - 30.0 |
0.5 max |
2.0 max |
2.0 max |
- | Higher corrosion resistance and higher strength at temperature upto 1050oC (avoid 815oC). |
HRCS 20/25 |
Grade 9 | 1.4848 | HK | 0.20 - 0.60 |
18.0 - 22.0 |
24.0 - 28.0 |
0.5 max |
2.0 max |
2.0 max |
- | Suitable for stressed parts working upto 1100o C such as billet skids, heat treating trays & fixtures. Unsuited at 815o C and in operations involving thermal shocks. |
HRCS 20/25 |
- | 1.4848 | HK40 | 0.35 - 0.45 |
19.0 - 22.0 |
23.0 - 27.0 |
0.5 max |
1.75 max |
1.5 max |
- | Same as HK but with better creep strength. |
AISI 314 |
- | - | - | 0.25 max |
19.0 - 22.0 |
23.0 - 26.0 |
- | 1.5 - 3.0 |
2.0 max |
- | Same as HK but Si increased for greater resistance to carburization. |
HRCS HKNb |
- | - | HK40 Nb | 0.35 | 19.0 - 22.0 |
23.0 - 27.0 |
0.5 max | 0.5 - 2.0 |
1.5 max |
0.5 - 1.5 Nb | - |
HRCS 24/24 Nb |
- | 1.4855 | IN519 | 0.25 - 0.35 |
23.0 - 25.0 |
23.0 - 25.0 |
0.5 max |
0.1 max |
1.0 max |
1.4 Nb | Same as HK 40 but with enhanced high temperature resistance upto 1025o C. |
HRCS 29/20 |
Grade 10 | - | HL | 0.2 - 0.6 |
18.0 - 22.0 |
28.0 - 32.0 |
0.5 max |
2.0 max |
2.0 max |
- | Higher corrosion resistance and higher strength at temperature upto 1100oC (avoid 815oC). |
HRCS 25/20 |
Grade 11 | - | HN | 0.20 - 0.50 |
23.0 - 27.0 |
19.0 - 23.0 |
0.5 max |
2.0 max |
2.0 max |
- | Suitable for applications upto 1100oC for furnace parts such as grates, etc. with increased ductility. |
HRCS 32/20 Nb |
- | 1.4859 | Castalloy 800H |
0.10 - 0.15 |
30.0 - 33.0 |
19.0 - 21.0 |
0.5 max |
1.5 max |
1.5 max |
0.8 - 1.0 Nb | Suitable for manifolds and headers. Service limit upto 980o C with increased ductility. |
HRCS 35/25 |
- | - | HP | 0.35 - 0.75 |
33.0 - 37.0 |
24.0 - 28.0 |
0.5 max |
2.5 max |
2.0 max |
- | Resistant to both oxidizing and carburizing atmospheres at high temperatures upto 1050o C. |
HRCS 35/25 Nb |
- | 1.4852 | HP modified | 0.35 - 0.45 |
33.0 - 36.0 |
24.0 - 28.0 |
0.5 max |
1.2 max |
1.2 max |
0.5 - 1.0 W, 0.8 - 1.2 Nb |
Same as HP but with enhanced high temperature resistance upto 1100o C. Suitable for reformer ethylene furnace tubes, radiant tubes, etc. |
HP-Mo | - | - | - | 0.35 - 0.45 |
33.0 - 36.0 |
24.0 - 28.0 |
1.0 - 1.5 |
1.6 max |
1.0 max |
- | - |
HRCS 35/15 |
Grade12 | - | HT | 0.35 - 0.75 |
33.0 - 37.0 |
15.0 - 19.0 |
0.5 max |
2.5 max |
2.0 max |
- | Suitable for highly stressed parts upto 1095o C including for carburizing operations. High sulphur gases and thermal shocks are detrimental. |
HRCS 39/19 |
Grade 13 | - | HU | 0.35 - 0.75 |
37.0 - 41.0 |
17.0 - 21.0 |
0.5 max |
2.5 max |
2.0 max |
- | Suitable for applications upto 1095o C including for carburizing operations. Can withstand corrosive applications with rapid thermal cycles. |
45/30 Nbw |
- | - | - | 0.40 max |
42.0 - 46.0 |
32.0 - 36.0 |
- | 1.0 max |
1.0 max |
0.5 W 0.5 Nb |
Useful for components operating in hot zone of pyrolysis coils and components of Reformer outlet manifold service limit 1150o C |
22H | - | 2.4879 | - | 0.35 - 0.45 |
48.0 - 52.0 |
27.0 - 29.0 |
- | 1.5 max |
1.5 max |
4.0 - 6.0 W | Same as HP but with enhanced high temperature resistance upto 1150o C. Suitable for radiant tubes, air injection tubes, reformer tubes and fittings for petrochemical furnaces, tube sheets, tube supports, etc. |
Super 22H | - | - | - | 0.40 - 0.50 |
46.0 - 50.0 |
27.0 - 29.0 |
- | 2.0 max |
1.5 max |
4.0 - 6.0 W, 2.0 - 4.0 Co |
Same as 22H but with enhanced high temperature resistance upto 1180o C. |
HRCS 60/12 |
- | - | HW | 0.35 - 0.75 |
58.0 - 62.0 |
10.0 - 14.0 |
0.5 max |
2.5 max |
2.0 max |
- | Excellent thermal shock resistance and resistance to carburisation up to 1040o C where sulphur is not present. |
HRCS 66/17 | Grade 14 | - | HX | 0.35 - 0.75 |
64.0 - 68.0 |
15.0 - 19.0 |
0.5 max |
2.5 max |
2.0 max |
- | For severe service applications upto 1150o C where corrosion resistance is required. |
Canalloy | - | - | - | 0.50 - 0.65 |
10.0 - 14.0 |
22.0 - 26.0 |
- | 1.75 - 2.25 |
1.5 max |
- | Bushes & sleeves for hot dip galvanizing line. |
Canalloy Controlled Manganese | - | - | 0.65 max |
10.0 - 14.0 |
22.0 - 26.0 |
- | 1.75 - 2.25 |
0.75 - 1.50 |
0.03 S max 0.03 P max |
Bushes & sleeves for hot dip galvanizing line. | |
UMCO-50 | - | - | - | 0.05 - 0.12 |
- | 27.0 - 29.0 |
- | 0.5 - 1.0 |
0.5 - 1.0 |
48.0 - 52.0 Co, Bal Fe |
Furnace parts in heat-treating furnaces, slag notch rings and tundishes. |
Cobalt Alloy 6 | - | R30006 | - | 0.90 - 1.40 |
3.0 max | 28.0 - 32.0 |
1.5 max |
2.0 max |
2.0 smax |
3.0 Fe max, 3.5 - 5.5 W, Bal Co |
Wear plates and bars, bushes & sleeves for operation in hot & corrosive atmosphere, where lubrication is impossible, with superior performance. Similar to Stellite |
Cobalt Alloy 12 | - | R30012 | - | 1.70 - 2.00 |
1.5 max |
27.0 - 32.0 |
- | 0.7 max |
2.5 max |
7.5 - 9.5 W, 3.0 Fe max, Bal Co |
Cutting tools and bushes & sleeves for operation in hot & corrosive atmosphere, where lubrication is impossible, with superior performance. Similar to Stellite |
Cobalt Alloy Special | - | - | - | 1.10 - 1.40 |
- | 26.0 - 28.0 |
- | 1.8 - 2.2 |
0.4 - 0.8 |
63.0 - 67.0 Co, 4.0 - 5.0 W, 2.0 Fe max |
For better sliding wear property. Hardness is between 375 to 432 HRB. Similar to Stellite |
40 Ni 60 CrNb |
R20600 | - | ASTM A560 Gr 40/60 Nb |
0.10 max |
Balance | 58.0 - 62.0 |
- | 1.0 max |
0.3 max |
0.02 P max, 0.02 S max, 0.3 N max, 1.0 Fe max, 0.5 Al max, 0.25 Nb max |
- |
50 Ni 50 CrNb |
- | 2.4680 | ASTM A560 Gr 50/50 Nb |
0.10 max |
Balance | 47.0 - 52.0 |
- | 0.5 max |
0.3 max |
1.4 - 1.7 Nb, 0.02 P max, 0.02 S max, 1.0 Fe max |
Suitable for applications upto 9500 C in furnace parts. Can withstand fuel ash corrosion. Good creep strength and good resistance to oxidation and carburization. |
60 Ni 40 CrNb |
- | - | ASTM A560 Gr 60/40 Nb |
- | - | - | - | - | - | - | For heat resisting and elevated temperature corrosion resistance application such as tube hangers. |
CY-40 (70Ni15Cr) | - | - | ASTM A494 Gr CY-40 |
0.35 - 0.45 |
Balance | 14.0 - 17.0 |
- | 3.0 max |
1.5 max |
11.0 Fe max | Frequently used for elevated temperature fittings in conjunction with Inconel. Suitable for boiler feed water plants and where high strength, high resistance to wear, corrosion and oxidation at elevated temperatures is required. Similar to Inconel |